3D PRINT Mounting Brackets

Below you can find quick links to 3D printed parts for your telescopic mounts,

rDUINOScope housing - http://www.thingiverse.com/thing:2756219
rDUINOScope housing for PCB from Otto Winter. You can buy the assembled kit here.
by Neuge, published Jan 13, 2018
EQ5 NEMA17 holder - http://www.thingiverse.com/thing:2278288
Holder for stepper motor Nema17 on equatorial mount type EQ5 or similar (CG5, GP, GP-DX ...),
Position for RJ11 connector.
EQ5 Nema 17 - http://www.thingiverse.com/thing:1833860
Support pour moteur pas à pas sur monture équatoriale de type EQ5 ou similaire (CG5, GP, GP-DX ...), pour projet AstroEQ de vos montures EQ. Attache pour connecteur RJ11 intégré. Prévoir courroie GT2 de 130mm pour un montage avec une poulie de 40 dents et de 16 dents.
EQ6 Dec motor adapter - http://www.thingiverse.com/thing:2146389
A quick upgrade from old EQ6 132:1 48 steps to modern 3.91 200 steps motors for declination axis
EQ6 RA motor adapter - http://www.thingiverse.com/thing:2190495
EQ6 plate adapter for NEMA17 stepper.
SFK 628z bearing required.
It have been built and tested on my mount.
Vixen Super Polaris NEMA17 Mount - http://www.thingiverse.com/thing:386402
Trying to make my old Vixen Super Polaris a go-to mount, so I started with some NEMA17 Stepper mounts, pretty straightforward.
Comments welcome! There are 2 Files here, one for RA and one for DEC, the support is flipped on them so it's on the outside of the mount.
144:1 Wormgear - https://www.thingiverse.com/thing:2518984
Wormgear for my (Stefan Mäkelä) homemade telescope equatorial mount.
#rDuinoScope joystick mount - https://www.thingiverse.com/thing:2511541
This is part for my (Stefan Mäkelä) #rDuinoScope Telescope Goto System.